Allied Telesis AT-TQ4600 IEEE 802.11ac 1.27 Gbit/s Wireless Access Point - 2.40 GHz, 5 GHz - MIMO Technology - 1 x Network (RJ-45) - Ethernet, Fast Ethernet, Gigabit Ethernet - Wall Mountable, Ceiling Mountable AT-TQ4600

Allied Telesis AT-TQ4600 IEEE 802.11ac 1.27 Gbit/s Wireless Access Point - 2.40 GHz, 5 GHz - MIMO Technology - 1 x Network (RJ-45) - Ethernet, Fast Ethernet, Gigabit Ethernet - Wall Mountable, Ceiling Mountable

The Allied Telesis AT-TQ4600 Enterprise-class Wireless Access Point features an IEEE 802.11ac 3ss dual-band 2.4/5GHz radio and embedded antenna, capable of 1750Mbps raw wireless capacity The AT-TQ4600 is based on IEEE 802.11ac, with three-spatial-stream Multiple Input and Multiple Output (MIMO), which can deliver up to twice the wireless capacity of 802.11n access points. The AT-TQ4600 may operate either in standalone, AP-cluster, or controlled by UWC controller, and is suitable for a wide range of deployments - from SMBs to large Enterprises. In large deployments with centralized control and management by UWC WLAN controller, operating costs are kept low by making the network simple to configure, monitor, and manage. For smaller deployments, without the UWC controller, the APs can function either as standalone APs or as a cluster of APs. When operating as a cluster, the APs are grouped to share the configuration and manage the channel automatically, and there is a single point of management, allowing easy management of all access points. It will reduce the cost for multiple AP configuration and operation management. The AT-TQ4600 is equipped with advanced encryption and authentication IEEE 802.11i capabilities. It protects a WLAN by segmenting public and private access with multiple Service Set Identifications (SSIDs) and VLAN Tagging. Rogue access point detection provides the ability to detect unauthorized access points, thus preventing unauthorized entry to the wireless network. The AT-TQ4600 can be deployed on desktop or by mounting on wall or ceiling. Power may be provided via Power over Ethernet (IEEE 802.3at PoE) or with an optional AC/DC power adapter.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: