ARCTIC Freezer i13 X Cooling Fan/Heatsink - 1 Pack - 3.94" Maximum Fan Diameter - 2000 rpm - 35.8 dB(A) Noise - Air Cooler - Fluid Dynamic Bearing - 4-Pin - Socket LGA-1200, Socket H4 LGA-1151, Socket H3 LGA-1150, Socket H2 LGA-1155, Socket H LGA-115

Arctic Freezer i13 X Cooling Fan/Heatsink - 1 Pack - 3.94" Maximum Fan Diameter - 2000 rpm - 35.8 dB(A) Noise - Air Cooler - Fluid Dynamic Bearing - 4-Pin - Socket LGA-1200, Socket H4 LGA-1151, Socket H3 LGA-1150, Socket H2 LGA-1155, Socket H LGA-1156 Compatible Processor Socket - 1 pc(s) - Processor

SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility. PRE-APPLIED MX-2 THERMAL PASTE Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly. LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X. OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air. P-FAN FOR INCREASED PERFORMANCE Inspired by the P-series, the Freezer i13 X''s fan benefits from all of the advantages of P-fans: High static pressure for increased cooling performance Broad RPM range Lower power consumption Less vibration PWM for synchronous fan control

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: