Avue HDMI-EX250, 4K HDBaseT HDMI Extender, up to 250ft. for 1080P/ 150ft. for 4K - 1 Input Device - 1 Output Device - 250 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 4K - Rack-mountable HDMI-EX250

Avue HDMI-EX250, AVUE 4K HDBaseT HDMI Extender, up to 250ft. for 1080P/ 150ft. for 4K - 1 Input Device - 1 Output Device - 250 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 4K - Rack-mountable

AVUE HDMI-EX250 is an HDMI extender using a single CAT5e/6/7 cable for up to 250 ft. for 1080P and 150ft. for 4K between the Sender TX and Receiver RX unit. Full HD support 1080P@6Hz@48b/Pixel, and 4Kx2K;UTP/STP cable termination follows the standard of IEEE-568B. Transmission distance reaches up to 250 ft. under the video format of 1080P and 4K up to 150 ft.POC (RX powered by TX) HDCP2.2/1.4 compliant. Supports Full HD 1080p@60Hz@48b/pixels, 3D and 4Kx2K with LED indicators to show the power status and ESD protection inside. Mounting ears supplied. FEATURES Supports Full HD 1080p@60Hz@48b/pixels, 3D and 4Kx2K Over single Cat5e/6 up to 250ft. for 1080P/ 150 for 4K POC (RX powered by TX)/ HDCP2.2/1.4 complaint/ESD Protection Transfer bidirectional infrared control signal together w/ HDMI signal Video Format Supported DTV/HDTV; 4K/1080P/1080i/720P/576P/480P/576i/480i Supported Audio Format: Support DTS-HD, Dolby-HD Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL) Poc Power: From TX to RX over Cat5/6 cable

Technical Specifications:
Connectivity Technology: Wired
Number of Input Devices Supported: 1
Number of Output Devices Supported: 1
Maximum Operating Distance: 250 ft
Graphics Modes: 4K
Network (RJ-45): Yes
HDMI In: Yes
HDMI Out: Yes
Number of Network (RJ-45) Ports: 1
Number of HDMI Inputs: 1
Number of HDMI Outputs: 1
Transmitter Height: 4.13"
Transmitter Width: 2.80"
Transmitter Depth: 0.98"
Receiver Height: 4.13"
Receiver Width: 2.80"
Receiver Depth: 0.98"
Form Factor: Rack-mountable
Transmitter Weight (Approximate): 1.54 lb
Receiver Weight (Approximate): 1.54 lb
Package Contents:

1 x Sender TX Unit, 1 x Receiver RX Unit, 1 x 12VDC Power Adapters (RX can be powered from TX), 2 x IR TX Unit, 2 x IR RX Unit, 2 x Phoenix plugs for RS232 Cable Termination, User's Manual

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: