Google Translate

Comnet CNFE3TX2CXMSU 1 SIM Cellular, Ethernet Modem/Wireless Router - 4G - LTE 1900, LTE 1700, LTE 850, LTE 700 - LTE, HSUPA, HSDPA, EDGE, GPRS(2 x External) - 1 x Network Port - 1 x Broadband Port - PoE Ports - Fast Ethernet - VPN Supported - Wall Mounta

Comnet CNFE3TX2CXMSU 1 SIM Cellular, Ethernet Modem/Wireless Router - 4G - LTE 1900, LTE 1700, LTE 850, LTE 700 - LTE, HSUPA, HSDPA, EDGE, GPRS(2 x External) - 1 x Network Port - 1 x Broadband Port - PoE Ports - Fast Ethernet - VPN Supported - Wall Mounta
Brand: Comnet
Part Number: CNFE3TX2CXMSE
MSRP: $1,056.99
Availability: 10 or more
Condition: New
Price: $880.33
Qty:     - OR -   Add to Wish List
Add to Compare
ComNet CNFE3TX2CXMSU 1 SIM Cellular, Ethernet Modem/Wireless Router - 4G - LTE 1900, LTE 1700, LTE 850, LTE 700 - LTE, HSUPA, HSDPA, EDGE, GPRS(2 x External) - 1 x Network Port - 1 x Broadband Port - PoE Ports - Fast Ethernet - VPN Supported - Wall Mountable, DIN Rail Mountable

The ComNet CNFE3TX2CXMS(U,E) is an edge Cellular VPN Gateway with 2 10/100TX Ports (1 × LAN, 1 × WAN) and 1 standard SIM card slot. It supports 802.1X and MAC filter for security control. The Gateway can be configured to operate in 3 modes: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. The units can be powered by an IEEE 802.3af PoE compliant device on port 1 or through the 4-Pin terminal block with dual DC Inputs. The Gateways are DIN Rail mountable and feature a rigid IP-30 housing.FEATURES Supports 802.1X Authentication HTTPS Support for Secure Management 4G LTE Modem Built In OpenVPN, IPsec VPN, PPTP VPN NAT Support (Virtual Server, Port Trigger, DMZ and UPnP) 1KV Isolation for PoE PD Port DIN-Rail and Wall Mountable Event Warning by Syslog, Email and SNMP Trap Cellular Antennas included Certified for AT&T Networks APPLICATIONS Remote locations where network access is required Wireless Perimeter Surveillance Temporary Network Surveillance Deployments Site to Site VPN Redundant Gateway Electrical substation SCADA and distribution automation networks; protective relaying systems; power transmission & distribution systems; remote/unattended wind farm, hydroelectric, and solar/photovoltaic power generation facilities; and other electrical utility-specific applications NERC-CIP-014 compliance for perimeter security, surveillance monitoring, and controlled access to electrical substations and power generating facilities, and other critical infrastructure/high value, mission-critical sites and assets Industrial/Factory Automation & Process Control SCADA Networks Distribution Automation: Remote status indication, monitoring, and control of reclosers, capacitor banks, voltage regulators, and other remotely-located electrical utilityspecific equipment, via the internal cellular radio link Integrated IP-Video, VOIP, and Data Transmission Networks Wastewater treatment plants, and suppliers of potable drinking water ITS/transportation closed-loop signalization and VMS/VDS/ surveillance/incident detection systems City Center security and surveillance monitoring Military, defense, and government communications networks

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Partschase.com © 2024