Edge-Core Networks SMC Networks Gigabit Ethernet PoE Smart Switch - 8 Ports - Manageable - 2 Layer Supported - Desktop - 2 Year Limited Warranty SMCGS10P-SMART NA

SMC Networks Gigabit Ethernet PoE Smart Switch - 8 Ports - Manageable - 2 Layer Supported - Desktop - 2 Year Limited Warranty

SMC Network''s EZ Switch SMCGS10P-Smart is a new 10-port Gigabit Ethernet Smart switch providing 8 Gigabit PoE ports and 2 100/1000BASE-X SFP slots. The switch supports a flexible web-based management interface as well as SNMP for both IPv4 and IPv6. The new SMC Smart switch provides a range of feature-rich functions, including VLANs, Spanning Tree, link aggregation, multicasting, security, storm control, and QoS with 8 priority queues. Ideal for users looking to migrate from unmanaged to managed networks, this Smart switch is easy to install and perfect for SMB and SOHO businesses.

Technical Specifications:
Total Number of Network Ports: 8
Token Ring Port: No
LRE Port: No
Bypass: No
Modular: No
Number of PoE+ (RJ-45) Ports: 8
Stack Port: No
Port/Expansion Slot Details: 8 x Gigabit Ethernet Network, 2 x Gigabit Ethernet Expansion Slot
Media Type Supported: Twisted Pair
Ethernet Technology: Gigabit Ethernet
Network Technology: 10/100/1000Base-T, 1000Base-X
Number of Total Expansion Slots: 2
Expansion Slot Type: SFP
Number of SFP Slots: 2
Layer Supported: 2
Manageable: Yes
Management: Web-based Management, SNMP v1/v2, DHCP, RMON (groups 1, 2, 3, and 9), VLAN, QoS, Syslog, Telnet
Flash Memory: 8 MB
PoE (RJ-45) Port: No
Input Voltage: 110 V AC, 220 V AC
Power Source: Power Supply
Form Factor: Desktop
Height: 1.7"
Width: 13"
Depth: 8"
Weight (Approximate): 4.85 lb
Certifications & Standards: Safety:
CSA (CSA 22.2 NO 60950-1 & UL 60950-1), CB (IEC/EN60950-1)Electromagnetic Compatibility:
CE Mark, FCC Class A, EN 55022 (CISRP 22) Class A, EN 61000-3-2/3IEEE Standards:
802.3, 802.3u, 802.3ab, 802.3at, 802.3x, 802.1D, 802.1w, 802.1s

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: