HPE J2000 Dual IOM 2x100GbE NVMe-oF SFF TAA-compliant JBOF Storage - 24 x SSD Supported - 307 TB Supported SSD Capacity - 0 x SSD Installed - 1 x NVMe Controller - 24 x Total Bays - 24 x 2.5" Bay - 2 x Total Slot(s) - 100 Gigabit Ethernet - 2U - Rack

HPE J2000 Dual IOM 2x100GbE NVMe-oF SFF TAA-compliant JBOF Storage - 24 x SSD Supported - 307 TB Supported SSD Capacity - 0 x SSD Installed - 1 x NVMe Controller - 24 x Total Bays - 24 x 2.5" Bay - 2 x Total Slot(s) - 100 Gigabit Ethernet - 2U - Rack-mountable - TAA Compliance

Key Features High Performance with Very Low Latency HPE Flash Enclosures are an end-to-end NVMe solution with a non-blocking architecture in a PCI Gen4 ready chassis. Up to six 100GbE NVMe-oF ports providing the capability of up to 16.8M IOPs and 69 GB/s performance using 4K random reads. RoCE v2 connectivity adds only 4.85us of latency compared to internal PCIe SSDs. Remote Direct Memory Access (RDMA) reduces server CPU resources needed for applications to access data. Network Connected Solution delivers Shared Efficiencies The HPE J2000 Flash Enclosure improves the utilization of flash in the environment and facilitates Data Sharing (via NVMe Namespaces). Increase the availability of data with an HA design and NVMe-oF network connectivity. Deliver better Total Cost of Ownership (TCO) when compared to distributed and isolated internal SSDs. Reduce rack space and overall power requirements. High Available (HA) Architecture The HPE J2000 Flash Enclosure features hot swap, dual IO modules in an active-active configuration with hot swap, redundant power, and cooling. Each IO module has its own management interface while providing a single view of the entire system. Dual port SSDs allow access to data from either or both IO modules for performance and availability. Multipath support provides applications with improved fault tolerance.

Technical Specifications:
Number of Solid State Drive Supported: 24
Number of Solid State Drive Installed: 0
Total Solid State Drive Capacity Supported: 307 TB
Ethernet Technology: 100 Gigabit Ethernet
Number of Total Expansion Bays: 24
Number of 2.5" Bays: 24
Number of Total Expansion Slots: 2
Expansion Slot Type: QSFP28
Number of Controllers: 1
Controller Type: NVMe
Number of Power Supplies Installed: 2
Maximum Power Supply Wattage: 1600 W
Redundant Power Supply: Yes
Height: 3.4"
Width: 17.9"
Depth: 28.4"
Form Factor: Rack-mountable
Rack Height: 2U
Weight (Approximate): 56.22 lb

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: