General Information :
product Name : Hpe Dl385 Gen10 2u Rack Server
Processor & Chipset :
processor : Amd Epyc 7000 Series 7251 / 2.1 Ghz 120w
max Turbo Speed : 2.7 Ghz
number Of Cores : 8-core
cpu Qty : 1
max Cpu Qty : 2
cpu Upgradability : Upgradable
installed Size : L3 Cache - 64 Mb
cache Per Processor : 64 Mb
Memory :
stalled Size : 16 Gb / 1 Tb (max)
technology : Ddr4 Sdram
effective Memory Speed : 2666 Mhz
rated Memory Speed : 2666 Mhz
memory Specification Compliance : Pc4-20800
form Factor : Dimm 288-pin
features : Registered, Mixing Of Different Types Of Memory Modules Is Not Supported, 8-channel Memory Architecture, Hpe Smartmemory, Slots 17 - 32 Are Available In Two-processor Configuration Only
configuration Features : 1 X 16 Gb
ram Supported : Pc4-20800 - 1 Tb Registered Pc4-20800 - 4 Tb Load-reduced
Expansion / Connectivity :
bays : 8 (total) / 8 (free) X Hot-swap 2.5 Sff
slots : 1 (total) / 0 (free) X Flexiblelom 1 (total) / 1 (free) X Pcie 3.0 X16 - Half-length, Full-height 2 (total) / 2 (free) X Pcie 3.0 X8 - Half-length, Full-height 1 (total) / 1 (free) X Microsd Card (internal)
interfaces : 1 X Hp Ilo - Type A (1 In Front) 5 X Usb 3.0 (1 Front, 2 Rear, 2 Internal) 4 X Lan (gigabit Ethernet) - Rj-45 (4 Rear) 1 X Hp Ilo - Rj-45 (1 Rear) 1 X Vga (1 Rear) 2 X Usb 2.0 (2 In Front) 1 X Displayport (1 In Front)
Network Controller :
interface (bus) Type : Pci Express 2.0 X4
ethernet Ports : 4 X Gigabit Ethernet
ethernet Controller : Hpe 331i
data Link Protocol : Ethernet, Fast Ethernet, Gigabit Ethernet
remote Management Protocol : Snmp 3, Ipmi 2.0, Smash Clp
remote Management Controller : Integrated Lights-out 5
features : Wake On Lan (wol), Acpi Support, Pxe Support
compliant Standards : Ieee 802.3, Ieee 802.3u, Ieee 802.1q, Ieee 802.3ab, Ieee 802.3x, Ieee 802.3ad (lacp), Ieee 802.1as, Ieee 802.3az
Storage Controller :
storage Controller Type : 1 X Raid - Pcie 3.0 X8
controller Interface Type : Sata 6gb/s / Sas 12gb/s
storage Controller Name : Hpe Smart Array P408i-a
channel Qty : 8
raid Level : Raid 0, Raid 1, Raid 5, Raid 6, Raid 10, Raid 50, Raid 60, Raid 1 Adm, Raid 10 Adm
buffer Size : 2 Gb
Power Supply Type :
device Type : Power Supply - Hot-plug
power Redundancy : Optional
power Redundancy Scheme : 1+1 (with Optional Power Supply)
installed Qty : 1
max Supported Qty : 2
nominal Voltage : Ac 120/230 V (50/60 Hz)
power Provided : 500 Watt
80 Plus Certification : 80 Plus Platinum
efficiency : 94%
Dimensions & Weight :
width : 17.5 In
depth : 28.7 In
height : 3.4 In
weight : 32.85 Lbs