Intellinet Network Solutions 48-Port Gigabit PoE+ Layer2+ Managed Switch with 2 10 GbE SFP+ Ports, 400 Watt Power Budget, Rackmount - IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, Endspan" 561112

Intellinet Network Solutions 48-Port Gigabit PoE+ Layer2+ Managed Switch with 2 10 GbE SFP+ Ports, 400 Watt Power Budget, Rackmount - IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, Endspan"

Save installation time and money with PoE. The Intellinet 48-Port Gigabit Ethernet PoE+ Managed Switch with 2 SFP+ Ports (561112) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 48 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while providing a total switching capacity of 136 Gbps in for your network. Power over Ethernet 802.3at The Intellinet 48-Port Gigabit Ethernet PoE+ Managed Switch with 2 SFP+ 10 Gigabit Uplink Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet PoE/PoE+ Splitter. Future-Proof with 10 Gigabit Ethernet (IEEE 802.3ae) Equipped with two 10 GbE SFP+ open slots, the Intellinet 48-Port PoE+ Managed Rackmount Gigabit Switch is the ideal solution for cost-sensitive organizations considering 10 Gigabit Ethernet. With 10 GbE technology going mainstream and becoming ever more popular, the need for additional bandwidth has become more urgent than ever before - even in smaller networks. Whether you wish to connect servers, network attached storage units or NVRs at 10 Gbps, or perhaps you simply want to connect to another Gigabit switch without resorting to LACP techniques, 10 GbE provides the solution. And in case you are not quite ready for 10 GbE just yet, the Intellinet 48-Port PoE+ Managed Gigabit Switch will happily take standard 1.25G SFP transceiver modules, until the time is right for you to make the switch. Eliminate Bottlenecks with Gigabit Speeds Equipped with 48 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the Intellinet 48-Port Gigabit Switch offers plenty of performance for your computers, servers and other networking devices. Full Layer 2+ Management Features The switch includes full Layer 2+ Management features. The software set includes up to 4k 802.1Q VLAN and advanced protocol VLAN, private VLAN and MVR. There are eight physical Quality of Service queues, IPv4/v6 Multicast filtering, Rapid Spanning Tree Protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and spanning tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced network security features. It also provides Console CLI for out-of-band management and SNMP, Web GUI for in-band management.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: