Key Digital KD-X444S Video Extender Transmitter/Receiver - 1 Input Device - 1 Output Device - 229.66 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 4K UHD - 4096 x 2160 - Twisted Pair - Category 6 KD-X444S

Key Digital KD-X444S Video Extender Transmitter/Receiver - 1 Input Device - 1 Output Device - 229.66 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 4K UHD - 4096 x 2160 - Twisted Pair - Category 6

Key Features: HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth) Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx. Low Profile: Super slim chassis design Signal Extension: For resolution and cable quality »» 4K/UHD: 125 ft. (40m) maximum »» 1080p: 230 ft. (70m) maximum HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector Unit Control Mode: Provides control of Tx unit as well as connectivity status Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ CEC Pass-thru: For inter-device control between input and output HDMI channel Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: