MakerBot Cool Gray PLA Large Spool / 1.75mm / 1.8mm Filament - Cool Gray MP05784

MakerBot Cool Gray PLA Large Spool / 1.75mm / 1.8mm Filament - Cool Gray

MakerBot PLA Filament is the best, most consistent, and most tested filament for the MakerBot® Replicator® 2 Desktop 3D Printer.MakerBot PLA Filament is a bioplastic derived from corn. It''s guaranteed to have no heavy metals phthalates, or BPA.Each filament color is comprehensively quality tested at both 100-micron and 200- micron layer resolutions on the MakerBot Replicator 2 to verify it will perform every feature that MakerBot® MakerWare™ software offers and reliably slice and print every type of 3D model.If you''re new to 3D printing, MakerBot PLA Filament is a good material to start with because it''s easy to use and performs well on most prints. MakerBot PLA Filament adheres well to acrylic and to blue painter''s tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Technical Specifications:
Print Color: Cool Gray
Weight (Approximate): 2 lb
Additional Information: Spool Diameter: 8 in, Spool Width: 3 in, Spool Hub Hole: 2 in, Diameter: 1.75 mm,
Temperatures:, Glass Temp: 60-65°C (140-149°F), Melting Temp: 150-160°C (302-320°F), Nozzle Temp: 230°C (446°F)
Compatibility: MakerBot Replicator 5th Generation Z18 3D Printer

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: