Multi-Tech MT5656ZDX MultiModemZDX V.92 Data/Fax Modem - Serial - 2 x RJ-11 , 1 x DB-25 RS-232C Serial - 56 Kbps - TAA Compliance MT5656ZDX

Multi-Tech MT5656ZDX MultiModemZDX V.92 Data/Fax Modem - Serial - 2 x RJ-11 , 1 x DB-25 RS-232C Serial - 56 Kbps - TAA Compliance

The Multi-Tech MT5656ZDX modems are compatible with the ITU-TV.92 protocol that provide quick connections, downstream transmissions at speeds up to 56K bps, and upstream transmissions at speeds up to 48K bps when connected to V.92-compatible Internet Service Providers.

Technical Specifications:
Fax Technology: Super G3, Class 1.0, Class 2.0, Class 2.1, TIA/EIA TR29.2, T.4, T.30, EIA/TIA-578 Class 1, EIA/TIA 592 Class 2
Modulation: ITU-T V.92, ITU-T V.90, ITU-T V.34plus, ITU-T V.34, ITU-T V.34bis, ITU-T V.32, ITU-T V.22bis, ITU-T V.22, ITU-T V.21
Features: Caller ID, Auto-answer
Host Interface: Serial
Number of Modem (RJ-11) Ports: 1
Number of Phone Line (RJ-11) Ports: 1
Fax Transmission Data Rate: 14.4 kbit/s
Modem Transmission Data Rate: 56 kbit/s
Input Current: 150 mA
Form Factor: Desktop
Height: 1.2"
Width: 5.8"
Depth: 4.3"
Weight (Approximate): 8 oz
Package Contents: MT5656ZDX MultiModemZDX V.92 Data/Fax Modem, A DC power transformer, One RJ11 phone cable, A printed Quick Start Guide, A CD containing modem drivers, communications software (PhoneTools), this User Guide, AT Commands Reference, Guide which includes voice commands, a Fax 1 Commands Reference Guide, and Adobe Acrobat software, Four vinyl gripper feet for the bottom of the modem
Additional Information: Command Buffer: 40 Characters, Transmission Level: -11 dBm (North America and Pan Euro) - varies by country setting, Frequency Stability: ±0.01%, Receiver Sensitivity: -43 dBm under worst-case conditions, AGC Dynamic Range: 43 dB, Data Format: Serial, binary, asynchronous, Voice Mode Sampling: Up to 44.100 KHz (down-sampled to 11.025KHz)
Compatibility: Windows 95, Windows 98, Windows NT, Windows 2000, Linux (2.2.x kernal)
Certifications & Standards: FCC Part 15 Class B, FCC Part 68 Telecom, EMC, Safety, and R&TTE Directive, CE, 89/336/EEC, 73/23/EEC, 1999/5/EC, UL-CUL
System Requirements: The processor speed should be at least 75 MHz in order to take full advantage of the ZDX-V's telephony features, A shielded RS232 serial cable with a male DB-25 connector on one end and a connector to match your computer's serial port on the other end

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: