SIIG Wallplate HDMI HDBaseT Kit - Through Cat5e/6 Cable up to 30m - 1920x1200 @60Hz CE-H23Y11-S1

SIIG Wallplate HDMI HDBaseT Kit - Through Cat5e/6 Cable up to 30m - 1920x1200 @60Hz

Wallplate design allows you to select and switch between any of the 2 HDMI source devices to display on an HDMI display up to 30 meters with audio output and microphone inputs. Great for education, boardrooms, waiting rooms Allows you to select and switch between any of the 2 HDMI source devices to display on an HDMI display up to 30 meters away Transmits HDMI signal via Cat5e/6 cable up to 30m at 1920x1200 @60Hz resolution Convenient and easy-to-use control device for presentation show rooms, classrooms, and boardrooms Supports front panel button control and web-based GUI control Supports PoC solution, to power the transmitter and control panel at the Receiver over CAT cable Receiver provides an RS-232 interface to connect with a projector, and then control it by sending RS-232 commands via web-based GUI Supports IR learning of the display device''s (projector, TV, etc.) IR remote for easy device control at the Control Panel

Warning: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: