SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe - Serial ATA/600 - PCI Express x2 - Plug-in Card - RAID Supported - 0, 1, 10 RAID Level - 3 Total SATA Port(s) - RoHS Compliance SC-SA0T11-S1

SIIG SATA 6Gb/s 3i+1 SSD Hybrid PCIe - Serial ATA/600 - PCI Express x2 - Plug-in Card - RAID Supported - 0, 1, 10 RAID Level - 3 Total SATA Port(s) - RoHS Compliance

SIIG''s SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.

Technical Specifications:
Host Interface: PCI Express x2
Controller Type: Serial ATA/600
RAID Supported: Yes
RAID Levels: 0, 1, 10
Total Number of SATA Ports: 3
Height: 4.7"
Width: 5.8"
Thickness: 0.8"
Form Factor: Plug-in Card
Weight (Approximate): 2.72 oz
Package Contents:

SATA 6Gb/s 3i+1 SSD Hybrid PCIe, 2 x SATA Data Cables, 4 x Screws, Driver/Software CD, Installation Guide

Additional Information:

Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost, Supports Port Multiplier FIS-based and Native Command Queuing (NCQ), Supports TRIM to extend the life of SSDs for maximum durability, HyperDuo mode supports Safe mode and Capacity mode, 48-bit LBA mode with support up to 4TB hard disk capacity, Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s & 1.5Gb/s HDDs, Single Port Multiplier

Environmentally Friendly: Yes
Environmental Certification: RoHS
Country of Origin: China

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: