Startech.Com 3 ft Cat6a Patch Cable - Shielded (STP) - Gray - 10Gb Snagless Cat 6a Ethernet Patch Cable - Category 6a - 3 ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Gray - RoHS Compliance C6ASPAT3GR

StarTech.com 3 ft Cat6a Patch Cable - Shielded (STP) - Gray - 10Gb Snagless Cat 6a Ethernet Patch Cable - Category 6a - 3 ft - 1 x RJ-45 Male Network - 1 x RJ-45 Male Network - Gray - RoHS Compliance

Make 10Gb Ethernet connections with PoE support. This 3-foot Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Reliable Cat6a 10 Gigabit connections Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amount of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Secured network connections For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port. Plus, the molded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance. The C6ASPAT3GR is backed by StarTech.com''s lifetime warranty for guaranteed reliability.

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Technical Specifications:
Cable Type: Category 6a
Cable Characteristic: Patch Cable
Cable Length: 3 ft
Connector Type on First End: RJ-45 Network - Male
Connector on First End Details: 1 x RJ-45 Network - Male
Connector Type on Second End: RJ-45 Network - Male
Connector on Second End Details: 1 x RJ-45 Network - Male
Connector Plating: Gold
Features: Molded, Stranded, EMI/RF Protection, Booted, Strain Relief, PoE, Damage Resistant, Break Resistant
Conductor: Copper
Shielding: Yes
Jacket Type: CMG
Device Supported: Network Device, Switch, Hub, Router, Patch Panel, Computer, Print Server
American Wire Gauge: 26 AWG
Data Transfer Rate: 10 Gbit/s
Boot Type: Snagless
Product Color: Gray
Jacket Material: Polyvinyl Chloride (PVC)
Weight (Approximate): 0.11 lb
Certifications & Standards: TIA/ETL-568-B2.10, UL 444
Environmentally Friendly: Yes
Environmental Certification: RoHS, REACH, WEEE
Country of Origin: China

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: