Startech.Com 75ft CAT6 Ethernet Cable - White Snagless Gigabit CAT 6 Wire - 100W PoE RJ45 UTP 650MHz Category 6 Network Patch Cord UL/TIA - 75ft White CAT6 Ethernet cable delivers Multi Gigabit 1/2.5/5Gbps & 10Gbps up to 160ft - 650MHz - Fluke tested

StarTech.com 75ft CAT6 Ethernet Cable - White Snagless Gigabit CAT 6 Wire - 100W PoE RJ45 UTP 650MHz Category 6 Network Patch Cord UL/TIA - 75ft White CAT6 Ethernet cable delivers Multi Gigabit 1/2.5/5Gbps & 10Gbps up to 160ft - 650MHz - Fluke tested to ANSI/TIA-568-2.D Category 6 - 24 AWG stranded 100% copper wire 100W PoE - 75 foot UL ETL verified Snagless UTP RJ45 patch/network cord - RoHS Compliance

This 75-foot Cat6 cable meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections. Plus, the cable features a durable white PVC jacket that enables you to color code your network cable runs as needed. Snagless RJ45 clips help protect your network connections For easier cable runs, the snagless connectors protect the cable''s RJ45 clips during installation, making them less likely to snag or break. This ensures a sturdy connection by preventing the cable from becoming loose from the port. The cable features molded boots that offer connector strain relief, by stopping the RJ45 connector termination points from bending at sharp angles, and reducing the risk of damage to the cable, which could decrease network performance. 100% copper for outstanding value Get the highest value for your cable investment with our Cat 6 cables, each one manufactured using high-quality copper conductors. 24-gauge wire for high-performance network connection Ensure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet, using cables that include 24 AWG copper. 50-micron gold connectors provide peak conductivity Rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH75WH is backed by StarTech.com''s lifetime warranty for guaranteed reliability.

Technical Specifications:
Cable Type: Category 6
Cable Characteristic: Patch Cable
Cable Length: 75 ft
Connector Type on First End: RJ-45 Network - Male
Connector on First End Details: 1 x RJ-45 Network - Male
Connector Type on Second End: RJ-45 Network - Male
Connector on Second End Details: 1 x RJ-45 Network - Male
Connector Plating: Gold
Features: Molded, Minimized Near-End Crosstalk (NEXT), Strain Relief, Stranded, Booted, Bend Resistant, Fray Resistant, Damage Resistant, Rust Resistant, Corrosion Resistant, PoE++, Heat Resistant, Flexible, Snag Resistant, Break Resistant, PoE, Stress Resistant
Conductor: Copper
Shielding: No
Jacket Type: CMG
Device Supported: Network Device, Workstation, IP Phone, Hub, Distribution Panel, Wall Outlet
American Wire Gauge: 24 AWG
Data Transfer Rate: 10 Gbit/s
Boot Type: Snagless, Molded
Product Color: White
Product Material: Copper
Jacket Material: Polyvinyl Chloride (PVC)
Weight (Approximate): 2.06 lb
Certifications & Standards: ANSI/TIA-568-B, ETL Verified, UL Listed, CMG Rated, TIA/EIA-568-B.1-2001 T568B
Environmentally Friendly: Yes
Environmental Certification: RoHS, WEEE, REACH
Country of Origin: China

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: