SYBA IO Crest 2 Port SATA III PCI-e 3.0 x1 Controller Card (Jmicro Chipset) - Serial ATA/600 - PCI Express 3.0 x1 - Plug-in Card - 2 Total SATA Port(s) - 2 SATA Port(s) Internal - PC, Linux, Mac SI-PEX40148

IO Crest 2 Port SATA III PCI-e 3.0 x1 Controller Card (Jmicro Chipset) - Serial ATA/600 - PCI Express 3.0 x1 - Plug-in Card - 2 Total SATA Port(s) - 2 SATA Port(s) Internal - PC, Linux, Mac

The IO Crest 2 Port SATA III PCI-e 3.0 x1 card ( SI-PEX40148 ) is the easiest way to update any computer with SATA ports with a PCI-e x1 slot or larger. Once installed this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device. Using the JMB582 chipset, the SI-PEX40148 can provide a maxium sequencial Read / Write Speed of 850 MB/s to 2 SATA 6Gb/s ports. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously.

Technical Specifications:
Host Interface: PCI Express 3.0 x1
Controller Type: Serial ATA/600
Total Number of SATA Ports: 2
Number of SATA Ports (Internal): 2
Form Factor: Plug-in Card
Package Contents:

2 Port SATA III PCI-e 3.0 x1 Controller Card (Jmicro Chipset), 1 x Low Profile Bracket, 1 x SATA Cable, 1 x Manual, 1 x Driver CD

Platform Supported: PC, Linux, Mac
Environmentally Friendly: Yes
Environmental Certification: WEEE
Country of Origin: China

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: