Thermaltake Water 3.0 240 ARGB Sync Cooling Fan/Radiator/Water Block/Pump - 4.72" Maximum Fan Diameter - 422.3 gal/min Maximum Airflow - 1500 rpm - 25.8 dB(A) Noise - Liquid Cooler - Hydraulic Bearing - 4-pin - Socket TR4, Socket AM4, Socket FM2, Soc

Thermaltake Water 3.0 240 ARGB Sync Cooling Fan/Radiator/Water Block/Pump - 4.72" Maximum Fan Diameter - 422.3 gal/min Maximum Airflow - 1500 rpm - 25.8 dB(A) Noise - Liquid Cooler - Hydraulic Bearing - 4-pin - Socket TR4, Socket AM4, Socket FM2, Socket FM1, Socket AM3+, Socket AM3 PGA-941, Socket AM2 PGA-940, Socket R4 LGA-2066, Socket LGA 2011-v3, Socket R LGA-2011, Socket B LGA-1366, ... Compatible Processor Socket - ARGB LED - Rubber, Copper - Motherboard, Processor

All-in-one 240mm liquid cooler with PWM fan that supports 5V RGB capable motherboards. WATER 3.0 ARGB 240 The Water 3.0 ARGB Sync CPU cooler, is an all-in-one cooling solution that is available in either 120mm, 240mm or 360mm variants. Able to provide an alternative cooling solution to standard air cooling, the Water 3.0 is a perfect fit for achieving higher performance in any system. It''s also a fantastic choice for those that can''t get enough RGB lighting in their build; thanks to the included Pure ARGB 5 volt radiator fans, switching between different lighting effects and colour options has never looked this good. LOWER HEAT, HIGHER PERFORMANCE | KEEPING COOL UNDER PRESSURE When it comes to optimizing PC performance, keeping your components cool should always be a priority. A CPU is the beating heart of any gaming system, and is always going to require the best cooling hardware in order to help support it. By utilizing an all-in-one liquid cooler such as the Water 3.0, the truest potential of your CPU can be fully realized.Over-clocking is something that can only be achieved through a liquid cooling solution, allowing your system to achieve even higher performance targets. You can also rest easy knowing that when you use the Water 3.0, it will help in eliminating any risks of damage to your hardware that can sometimes cause due to inefficient cooling be applied from stock cooling methods. HASSLE-FREE INSTALLATION Implementing a new cooler is easier than you think. The Water 3.0 is both simple and straightforward when it comes to implementing it into your system. A lot of the work is already done for you, with thermal paste already pre-applied on the base of the waterblock to allow for stress free placement.When it comes to a simple and efficient water cooling solution, the Water 3.0 is by far the easiest and most user friendly. No maintenance required or coolant to periodically top up, unlike traditional cooling setups. Once you''ve integrated the Water 3.0 into your system, you can set it and forget it. JUST BE COOL Making sure your components always receive the right amount of cooling, should always be a priority when it comes to deciding on which case to house your system. Which is why we''ve endeavored to give you plenty of cooling options in the View 27.Whether you''re just starting out and want to play it safe by just utilising fan cooling, or you''re a bit more adventurous and want to try your hand at a liquid cooling loop; the View 27 offers plenty of space for any and all of these cooling solutions and more

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: