Google Translate

Tripp Lite Component Video RCA Over IP Extender Transmitter Over Cat5/Cat6 - 1 Output Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant - TAA Compliance B160-00

Tripp Lite Component Video RCA Over IP Extender Transmitter Over Cat5/Cat6 - 1 Output Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant - TAA Compliance B160-00
Brand: Tripp Lite
Part Number: B160-001-CSI
MSRP: $228.99
Availability: 10 or more
Condition: New
Price: $190.16
Qty:     - OR -   Add to Wish List
Add to Compare
Tripp Lite Component Video RCA Over IP Extender Transmitter Over Cat5/Cat6 - 1 Output Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant - TAA Compliance

The B160-001-CSI Component Video (RCA) over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute component video, stereo audio, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite''s NG5, you can continue extending the distance between source and display up to 328 feet per switch. The B160-001-CSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches with Internet Group Management Protocol (IGMP), such as Tripp Lite''s NSS-G16D2.With a compatible B160-Series receiver, you can send the component video and stereo audio to any analog or digital display, including DisplayPort™, HDMI and VGA, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-CSI supports video resolutions up to 1080i. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.


Technical Specifications:
Connectivity Technology: Wired
Number of Output Devices Supported: 1
Maximum Operating Distance: 328.08 ft
Graphics Modes: WUXGA
Maximum Video Resolution: 1920 x 1200
Network (RJ-45): Yes
HDMI Out: Yes
Number of Network (RJ-45) Ports: 1
Number of HDMI Outputs: 1
Media Type Supported: Twisted Pair
Twisted Pair Cable Standard: Category 6
Product Color: Black
Transmitter Height: 1.17"
Transmitter Width: 5.04"
Transmitter Depth: 3.94"
Form Factor: Rack-mountable
Transmitter Weight (Approximate): 1.59 lb
Package Contents:
    B160-001-CSI Video Extender Transmitter, External Power Supply (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V 2A), Plug Adapters for North America, U.K., Europe and Australia, IR-Out Cable, 3.5 mm to DB9 Adapter Cable (M/F), Mounting Hardware, Owner's Manual

Environmentally Friendly: Yes
Environmental Certification: RoHS
Country of Origin: Taiwan
TAA Compliant: Yes

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Partschase.com © 2024