Tripp Lite HDMI over Cat5/Cat6 Active Video Extender / Remote Repeater 1080p 175'' - 1 Input Device - 2 Output Device - 700 ft Range - 2 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Category 5 - Wall Mountable, Rack-mountable, Pole-mo

Tripp Lite HDMI over Cat5/Cat6 Active Video Extender / Remote Repeater 1080p 175'' - 1 Input Device - 2 Output Device - 700 ft Range - 2 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Category 5 - Wall Mountable, Rack-mountable, Pole-mountable - TAA Compliant - RoHS, TAA, WEEE Compliance

The B126-110 remote repeater unit can be added to your Tripp Lite B126-Series HDMI over Cat5 installation to increase the extension distance and/or add additional monitors. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite''s N202-Series) Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM). Installation is simple; just insert the B126-110 repeater into the middle of your installation. In the case of a B126-1A1 extender kit, the transmitter is connected to the HDMI source using a Tripp Lite P568-Series HDMI cable (not included). It is then connected via Cat5e/6 cable to the B126-110, which is connected via Cat5e/6 cable to the B126-1A1 receiver unit. Finally, a monitor is connected to each remote receiver and repeater unit using Tripp Lite P568-Series HDMI cable (not included). The B126-110 unit is TAA GSA Compliant.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: